CompuMed® is a computer-controlled anesthesia administration system which provides for accurate, painless injection of lidocaine during loop excision procedures.

Product Description
Models
Specifications
CompuMed® Brochure

Utah Medical Products introduces the CompuMed® Anesthesia Injection System. CompuMed’s proprietary computer-controlled mechanism and The Wand® handpiece allow for accurate, pain-free injection of lidocaine for loop excision procedures. Because the CompuMed® system provides the injection force, it is now possible to use the finest gauge needles — injection of the cervix is easily done with a 30 gauge needle.

CompuMed® provides a three-speed injection rate — the slow rate provides a small amount of lidocaine during insertion that anesthetizes as the needle penetrates. The normal injection rate is ideal to minimize discomfort — especially the ‘burning’ sensation and cramping that is often the result of a rapid injection. A high speed injection mode is also available for use at the user’s discretion.

Achieve cervical injections without hand fatigue — maintain control of loop excision motion

Needle cap holder enables one-hand recapping of used needle

Cartridge style system eliminates risk of needlestick inherent to traditional syringe loading from a vial

Amount of lidocaine remaining in cartridge is clearly displayed

Aspiration mode helps prevent intravascular injection of lidocaine and epinephrine

Footswitch controllable injection rate allows for pain and cramp-free injection by enabling lidocaine delivery during needle insertion

The Wand® extended length handpieces allow the use of fine gauge needles — inject with a 30 gauge needle. These 6” (15cm) extended length handpieces easily reach the cervix with a short needle, eliminating needle extenders and expensive reinforced needles.

The Wand's innovative design also minimizes retention of a significant volume of lidocaine that is characteristic of a needle extender.

The SafetyWand® optimizes sharps safety when using the CompuMed® system. SafetyWand® is lighter than a traditional syringe and is operated with one hand. The pen-like grasp provides optimal ergonomics, allowing maximal tactile control.

Needles up to 1¼” can be retracted multiple times to maintain sharps safety during multiple-cartridge injections. When injections are complete, the SafetyWand® can be permanently locked for safe disposal.

CompuMed® Anesthesia Administration Systems
Model Number Description Unit of Measure Image
RMD-1303-110 CompuMed® Computer Controlled Anesthesia Injection System (110 Volt System). * 1/EA
RMD-1303-220 CompuMed® Computer Controlled Anesthesia Injection System (220 Volt System). *
 1/EA
 
The Wand® Anesthesia Delivery Handpieces and Needles
Model Number Description Unit of Measure Image
RWA-2050A The Wand® Anesthesia Delivery
Handpiece without Needle. *		 10/BOX
RWA-2050-2725 The Wand® Anesthesia Delivery
Handpiece with 27ga 1¼” Needle. *		 10/BOX
RWA-2050-301 The Wand® Anesthesia Delivery
Handpiece with 30ga 1” Needle. *		 10/BOX
RWA-2050-305 The Wand® Anesthesia Delivery
Handpiece with 30ga ½” Needle. *		 10/BOX
RWA-2040-ASAF SafetyWand® Anesthesia Delivery
Handpiece without Needle. *		 10/BOX
N-27G125 27ga 1¼” Needle. * 100/BOX  
N-30G100 30ga 1” Needle. 100/BOX  
N-30G050 30ga ½” Needle. 100/BOX  
 
Maintenance and Replacement Items
Model Number Description Unit of Measure Image
RWA-1020 Replacement Plunger and 10 O-Rings. * 1/EA  
RWA-1030 Package of 10 O-Rings. * 1/EA  
RWA-1043 Pneumatic Footswitch. * 1/EA
 

* Product is CE Marked

CompuMed® Injection System
Cartridges: accepts standard 1.8 ml cartridges
Injection Rates:
(time to dispense 1.8 ml cartridge)		 slow: 280 - 330 sec
normal: 50 - 55 sec
high: 25 - 28 sec
 

 

Portal Login | To Order | Contact Us | Disclaimer | Home | © 1999 - 2010 Utah Medical Products, Inc.